• Built-in cyclocomputer features:
  • Current speed
  • Maximum speed
  • Average speed
  • Trip distance
  • Total distance
  • Altitude
  • Trip elevation gain
  • Total elevation gain
  • Maximum altitude
  • Incline
  • Temperature
  • Trip time
  • Time
  • Stopwatch
• Display
  • Number of LEDs: 32 (16 on both sides)
  • Resolution: 16x100 Pixel
  • LED colors: red, green, yellow, blue, magenta, cyan, white
  • 6 independent displays (upper, lower, and bling on each side)
  • Working from 10 to 100 km/h
• Communication
  • USB CDC for CLI
  • Bluetooth Low Energy (4.0, Bluetooth Smart)
    • Cycling Speed and Cadence (CSC) profile
    • proprietary profiles for configuartion and data exchange
    • virtual Serial Profile (vSP) for CLI
• Operating time
  • For 700 mAh LiPol battery about 30 h (depends on number of used LEDs an their color)
• Charging time
  • For 700 mAh LiPol battery about 3 h
• Weight
  • Elecronics 18 g (waterproof mould in PUR w/ frame 40 g), battery w/ frame 30 g

In this example the upper display shows the current speed and the lower display the string veloblingbling. Each side has its own independent upper an lower display. The Velo Bling-Bling side (surface) with the pushbutton is called top surface (usually the left side), the other side bottom surface.

Between this two displays there is another display called bling. If the upper or lower display is blank and bling display is not blank, the bling image/string is showed instead. The bling image is repeated till the end of the rotation, see the rear wheel in the video: the upper display shows the trip distance, the bling display shows the repeated image with the Swiss, German, French, and Italian flags. After each rotation the image is turned counterclockwise 4 pixel.